S/O Document Formats

SO Document Format

Field

Description

Document type

Indicate the type of document for which to configure print settings.

Invoice

Select this to define an invoice document.

Delivery note

Select this to define a delivery note document.

Order acknowledgement

Select this to define an order acknowledgement document.

Dispatch note

Select this to define a dispatch note document.

Format

This indicates the format assigned to the document type.

You can define up to 62 different formats (i.e. 0 to 9, A to Z and a to z) for each document type. This flexibility allows you to configure and print sales documents according to your own requirements as well as those of your customers.

Description

Enter a description for the document type and format you selected above.

Print method

Select the method by which you want to print your Sales Order documents.

If you change from a Word document to a Standard document format, you need to define print positions for the custom form fields you want to print on your document.

In a Word document, print positions for these fields are not required, but in the Standard document format they must be defined for the custom fields to print on the document.

Standard document

Select this to print Sales order documents using pre-printed stationery.

SRS document

Select this to print Sales order documents using SRS Document Printing.

See SRS Document Printing Overview for additional information.

Word document

Select this to print Sales order documents using pre-defined MS Word templates.

Refer to Word Printing for additional information about printing using MS Word.

Format options

Indicate the section you want to maintain.

You select one of the options and then use the Change function to define the preferences and page layouts for your document (see Format Options).

The options available vary according to the type of document you select to configure as well as the Print method you select.

Copy

Copy a document type to another format, or to another document type.

Change

Edit the preferences and print positions for the various sections of each of the sales order document types.

Save

Select this to save the details assigned to the document format.

Alignment

Print a document using test characters. This enables you to verify that the print positions and fields you defined for the document are correctly aligned.

It is advisable to print the alignment to the printer on which you will be printing your documents.

Print

Select this to print the sales order document format.

It is advisable to keep this report for disaster recovery purposes.

Delete

Select this to delete the currently selected document format.

Close

Select this to exit the program without saving any changes you made.

If you have made changes to the format, then the program prompts you to save or discard these changes.

Copy

You use the Copy function to copy a document type to another format, or to another document type.

This is useful if you want to define multiple formats for the same document type, with minor differences in each. Instead of having to re-define the entire document, you can copy the original document to another format and then apply the required changes to the copied format. Similarly, assuming two document types are similar (e.g. Invoices and Delivery Notes) you can define a document for one document type and copy this document format to the other document type. You can then amend the copied document as required.

Document types and formats can also be copied between companies (i.e. From one company to another).

Field

Description

Company

This indicates the company in which you are currently working. This is the company to which the label format will be copied.

Copy from document type

This indicates the document type you want to use to create the new document.

The document type you select here is copied to the document type you selected at the Document type field.

Invoice

Select this to copy an invoice document format to the new document.

Delivery note

Select this to copy a Delivery Note document format to the new document.

Order acknowledgement

Select this to copy an Order Acknowledgement document format to the new document.

Dispatch note

Select this to copy a Dispatch Note document format to the new document.

Format

Select the format of the document type you want to copy.

Change Company

Select this to change to a different company from which you want to copy a sales order document.

Copy from company

Indicate a valid company from which you want to copy a document format.

OK

Select this to accept the company id you entered at the previous prompt.

Cancel

Select this to return to the Copy Format screen without changing the company id.

OK

Select this to copy the document format you selected to the new document.


	This option does not save the format you copied. To save the new format, you must select Save from the S/O Document Format screen.

Cancel

Select this to exit the program without performing the copy.

Alignment

You use the Alignment function to print a document using test characters. This enables you to verify that the print positions and fields you defined for the document are correctly aligned.

It is advisable to print the alignment to the printer on which you will be printing your documents.

Field	Description
Print test sales order document alignment?
OK	Select this to print the test format alignment for the document.
Cancel	Select this to return to the previous screen without printing an alignment.

Messages

Heading Section Messages

You use the Heading Section Messages function to enter print positions for a Reprint message and for a Back order message on the order document.

Field	Description
Reprint message
Row	Enter the vertical position (i.e. top to bottom), at which you want to print the message.
Column	Enter the horizontal position (i.e. left to right) at which you want to print the message.
Message	Enter up to 10 characters to be the reprint message.
Document type message
Row	Enter the vertical position (i.e. top to bottom), at which you want to print the message.
Column	Enter the horizontal position (i.e. left to right) at which you want to print the message.
Invoice
Credit note
Debit note
Back order message	Indicate a message relating to back orders to be printed on order acknowledgement or delivery note document types. The back order message is only printed for sales orders that have been partially invoiced and are not complete (i.e. sales orders in a status of 2 or 3).
Row	Enter the vertical position (i.e. top to bottom), at which you want to print the message.
Column	Enter the horizontal position (i.e. left to right) at which you want to print the message.
Message	Enter up to 15 characters to be the message for back orders.
Close	Select this to close the current window and return to the previous window. You save the changes you made to the format at the time of exiting the program.

Total Section Message

You use the Total Section Message function to enter a print position for a Continuation message on the order document.

Up to 10 characters can be entered.

Field	Description
Continuation message
Row	Enter the vertical position (i.e. top to bottom), at which you want to print the message.
Column	Enter the horizontal position (i.e. left to right) at which you want to print the message.
Message	Indicate the actual text that must be printed on the document.
Close	Select this to close the current window and return to the previous window. You save the changes you made to the format at the time of exiting the program.

Multiple Bin Message

If the option: Multiple bins in use is selected against the warehouse (Browse on Warehouses), then you use the Multiple Bin Message function to enter a print position for a Bin message on the order document.

Up to 20 characters can be entered.

Field	Description
Bin message
Column	Enter the horizontal position (i.e. left to right) at which you want to print the message.
Message	Indicate the actual text that must be printed on the document.
Close	Select this to close the current window and return to the previous window. You save the changes you made to the format at the time of exiting the program.

Serial Number Message

You use the Serial Number Message function to enter a print position for a Serial message on the order document.

Up to 20 characters can be entered.

Field	Description
Serial message
Column	Enter the horizontal position (i.e. left to right) at which you want to print the message.
Message	Indicate the actual text that must be printed on the document.
Close	Select this to close the current window and return to the previous window. You save the changes you made to the format at the time of exiting the program.

Lot Number Message

You use the Lot Number Message function to enter a print position for a Lot message on the order document.

Up to 20 characters can be entered.

Field	Description
Lot number message
Column	Enter the horizontal position (i.e. left to right) at which you want to print the message.
Message	Indicate the actual text that must be printed on the document.
Close	Select this to close the current window and return to the previous window. You save the changes you made to the format at the time of exiting the program.

Dispatch Number Messages

You use the Dispatch Number Message function to enter a print position for a Dispatch number message on the order document.

Field	Description
Dispatch message
Column	Enter the horizontal position (i.e. left to right) at which you want to print the message.
Message	This indicates the actual text that must be printed on the document.
Consolidated dispatch invoices
Edit customer p/o number
Retain on invoice
Text	Indicate the actual text that must be printed on the document.
Close	Select this to close the current window and return to the previous window. You save the changes you made to the format at the time of exiting the program.

Format Options

You use the options on this tab to select the preferences and sections for which you want to define the print positions for your document(s).

The following sections are available depending on the Document type you selected to configure and the Print method you selected:

Preferences (see Preferences)
Heading section (see Heading Section)
Document custom form fields (see Document Custom Form Fields)
Customer custom form fields (see Customer Custom Form Fields)
Detail section (see Detail Section)
Detail custom form fields (see Detail Custom Form Fields)
Stock code custom form fields (see Stock Code Custom Form Fields)
Comment section (see Comment Section)
Miscellaneous/freight charge section (see Miscellaneous/Freight Charge Section)
Deposit detail section (see Deposit Detail Section)
Payment detail section (see Payment Detail Section)
Summary service charges section (see Summary Service Charges Section)
Single level component section
Multiple bin section (see Multiple Bin Section)
Lot traceability section (see Lot Traceability Section)
Serial number tracking section (see Serial Number Tracking Section)
Consolidate dispatch note number section (see Consolidated Dispatch Note Number Section Messages)
Total section (see Total Section)

SRS Options (see SRS Document Print Setup and SRS Document Template)

MS Word Options (see MS Word Options)

When you highlight a section for a Standard document format and select the Change function, the fields for which print positions can be defined are displayed.

The following options are used to indicate the print positions for these fields:

Field	Description
Clear Row/Column	Select this to delete the row and column print positions for the highlighted field. When you select this function, the print positions for the highlighted field are set to zero, which means the field is not printed.
Text Fields	The Text Fields function enables you to enter that you want to print at a specific position on each document.
Change	Select this to maintain the row and column print positions for the highlighted field.
Close	Select this to close the current window and return to the previous window. You save the changes you made to the format at the time of exiting the program.

Text Fields

The Text Fields function enables you to enter up to 8 lines of text (30 characters per line) that you want to print at a specific position on each document.

Field	Description
Clear text	Select this to clear the text and print positions for the highlighted text field.
Change	Select this to maintain the highlighted text line.
Text	Indicated the actual text that must be printed on the document.
Row	Indicate the vertical position (i.e. Top to bottom) at which you want to print the text entered in the Text field. The row specification for any field cannot exceed 65.
Column	Indicate the horizontal position (i.e. Left to right) at which you want to print the text entered in the Text field. The column specification for any field cannot exceed 120.
OK	Select this to accept the information you entered for the text field.
Cancel	Select this to ignore the information you entered for the text field and to return to the previous screen.
Close	Select this to return to the previous screen.

Positions

You use the Change function from within each section to maintain the row and column print positions for the highlighted field in the section.

Field	Description
Positions	All measurements are based from the top left hand corner of the page. For some fields, only the Row or only the Column may be available for you to define. To assist you in positioning the fields correctly, select the Print Mask for Document Alignment to print a grid of the required columns and lines. Ensure that the layout mask is output to the printer on which you will be printing your documents.
Row	This indicates the vertical position (i.e. top to bottom) at which you want to print the highlighted field. The row specification for any field cannot exceed 65.
Column	This indicates the horizontal position (i.e. left to right) at which you want to print the highlighted field. The column specification for any field cannot exceed 120.
OK	Select this to accept the print positions you entered.
Cancel	Select this to ignore the print position you entered and to return to the previous screen.

Custom Field Positions

This screen is displayed when use the Change function to maintain the row and column print positions for the highlighted field from within a section for custom forms.

All measurements are based from the top left hand corner of the page.

For some fields, only the Row or only the Column may be available for you to define.

To assist you in positioning the fields correctly, select the Print Mask for Document Alignment to print a grid of the required columns and lines. Ensure that the layout mask is output to the printer on which you will be printing your documents.

Field	Description
Field	Indicate which custom form field to print.
Row	Indicate the vertical position (i.e. Top to bottom) at which you want to print the highlighted field. The row specification for any field cannot exceed 65.
Column	Indicate the horizontal position (i.e. Left to right) at which you want to print the highlighted field. The column specification for any field cannot exceed 120.
OK	Select this to accept the print positions you entered.
Cancel	Select this to ignore the print position you entered and to return to the previous screen.

Preferences

You use this section to define the default page layout for each of the available sales order documents.

These preferences are defined separately for each document.

The following preferences can be selected when you use highlight the Preferences line and select the Change function:

Field

Description

Total number of lines on page

Indicate the number of lines you require on your order document. This is the length of the form in lines, for all the sections you want to print on the form. The entry made here cannot exceed 99.

Although you can define the form length as 99 lines, you cannot print more than 65 lines in an individual section (e.g. Heading, Detail, Total) of the form.

Total number of columns across page

Indicate the maximum column number that can be specified when defining the column print positions for fields on the document.

This must be in the range 1-150.

First detail line starts on line

Indicate the line number from the beginning of the page at which the first detail line must be printed, within the block of detail line information. The entry made here cannot exceed 65.

Last detail line ends on line

Indicate the line number at which the last detail line must be printed. This must be from the beginning of the page, within the block of detail line information. The entry made here cannot exceed 65.

Number of spaces between detail lines

Indicate the number of blank lines you want to insert between detail lines. An entry of zero indicates that no blank lines are required.

Width of one tax information column

Indicate the horizontal gap between each block of tax information. Up to eight different tax rates can be applied to the order.

If a zero is entered here, then the program assumes that the information must be vertically spaced.

The sales tax code, amount on which tax is payable, the tax percentage and tax amount can be grouped together for each tax code used.

Merchandised items print block size

Indicate the number of multiple lines (up to five lines is permitted) for each detail line.

Gap from one serial number to next

This must be greater than zero if you want to print more than one serial number on a single line.

Indicate the number of characters between where the first character of the first serial number on the line prints, and the first character of the second serial number on the line prints.

Number of serial numbers across page

Indicate the number of serial numbers you want to print on a single line.


	If you want to print more than one serial number per line, then you must set the option: Gap from one serial number to next to be at least one character longer than the longest serial number you are likely to print.

Gap from one multiple bin to next

Indicate the number of characters between where the first character of the first multiple bin on the line prints, and the first character of the second multiple bin on the line prints.

Number of multiple bins across page

Indicate the number of multiple bins you want to print on a line.

Number of decimals in volume to print

Indicate the number of decimals (0 to 6) that you want to print for the volume per stock unit field.

Override number of decimals to print for quantities

Select this to ignore the maximum number of decimals defined against the stock item when printing quantities on sales order documents.

You use the Minimum no. of decimals to print for quantities field to indicate the minimum number of decimals to print for quantities.

Minimum no. of decimals to print for quantities

Indicate the number of decimals to print for all quantities (except quantities for service charges) on your sales order documents.

Print date format

Indicate the format in which you want to print dates on your stationery. This can be based on your system date format or a user defined date format (i.e. short date or long date). These formats are defined within the System Setup program.

Print Options

Select this to define additional preferences for printing your sales order documents.

Bitmap Forms

Specify bitmap images that you want to print on your sales order documents when they are faxed and/or printed.

This allows you to create your own pre-printed stationery for your documents.

Notepad

Indicate how you want to print the text defined against the Sales order notes on the document.

Close

Select this to return to the previous screen.

You save the changes you made when you exit the program.

Print Options

This screen is displayed when you select the Print Options function.

Field

Description

Print detail freight lines

Select this if individual freight lines in order entry are required to be printed.

Print detail merchandise lines

Select this if individual other/misc charge lines entered in order entry are required to be printed.

Print currency for local invoices

Suppress trailing zeros in unit mass

Print delivery note only if merchandise line

Select this if you do not want to print delivery notes for orders that have no merchandise lines (i.e. Stocked or non-stocked).

If you select this option then delivery notes for orders that contain only comment, freight or miscellaneous charge lines are not printed, irrespective of your selection at the setup option: Print delivery note lines with zero quantity to ship (Sales Order Setup - Printing tab).


	A delivery note is printed providing it contains one or more merchandise lines, even if these lines are on backorder. To prevent this, you need to select this option together with the option: Print delivery note only if merch line to ship.

This option only applies to the Delivery Note format type.

Print delivery note only if merch line to ship

Select this to print delivery notes for orders only when there is a quantity to ship against a merchandise line (i.e. Stocked or non-stocked lines).

This option is only enabled is you selected the option: Print delivery note only if merchandise line.

Check for reserved as well as 'to ship'

Select this to also include lines with a reserved quantity on delivery notes. Lines with both a ship and reserved quantity, and lines with only a reserved quantity are included on the delivery note.

This option is only enabled if you selected the option: Print delivery note only if merch line to ship.

Quick Entry format

Use 1000 separator in values and prices

Select this to apply the 1000 separator configured within the Company Maintenance program (Options tab) to all numeric values and prices.


	If you have not configured a 1000 separator at company level, then selecting this option has no effect.

Print from previewed document

Select this to enable the Print/Email functions on the Print Preview screen when printing a document when not using SRS document printing.

You will also need to select the field: SO Print from preview option for your operator code (Operator Maintenance).

This option is not affected by SRS document printing.

To be able to print from a previewed document for SRS Document printing, you need to select the fields: SO Print from preview option and SO Print from document print preview (Operator Maintenance).

Only print service charges with merch line

Select this to only print service charges when they are attached to a merchandise line.

If you do not select this option, then you can invoice attached service charges without the attached merchandise line.


	This option is ignored when printing Counter Sales invoices (i.e. service charges are always printed on a Counter Sale document irrespective of your selection here).

Value order acknowledgment with ship qty

By default, the order quantity is used to calculate the document totals for order acknowledgement documents.

Select this if you want to use the ship quantity instead of the order quantity to calculate the document totals on order acknowledgement documents. Document totals include the values, tax, mass and volume figures.

Selecting this option therefore enables you to use the order acknowledgement document as a form of pro forma invoice.

Override editing of postal code

This enables you to control the format in which you want to print postal/zip codes on sales order stationery.

The effect that this option has when printing postal codes on sales order stationery depends on your selection against the company setup option: Edit postal/zip codes as 5-4 (Company Maintenance) as follows:

Edit postal/zip codes as 5-4	Override editing of postal code	Result
Selected	Selected	Postal code is not edited
Selected	Not selected	Postal code is edited
Not selected	Selected	Postal code is edited
Not selected	Not selected	Postal code is not edited

Print all back-ordered lines

This option is only available for Invoice and Delivery note document types. This option is not relevant for Dispatch Note invoices.

If you select this option when defining an Invoice document type, then details of back-ordered lines are printed on the invoice regardless of your selections against the setup option: Initial invoice printing (Sales Order Setup - Printing tab).

If you select this option when defining a Delivery note document type, then details of back-ordered lines are printed on the delivery note regardless of your selections against the setup option: Delivery note options (Sales Order Setup - Printing tab).

If you want to print a delivery note line when the quantity to ship is zero, then you must select the setup option: Print delivery note lines with zero quantity to ship (Dispatch Notes Setup - Options tab). If you did not select this option when the delivery note document was initially printed, then details of back-ordered lines cannot be printed on a reprint of these documents, even if you select this option before reprinting the documents.

Print all warehouse bins with qty on hand

Select this to print all bins with a positive on hand quantity on either a Delivery Note or an Order Acknowledgement document (i.e. this option only applies to Delivery Note and Order Acknowledgement document types).

If you select this option, then you must define the options: Number of multiple bins across page and Gap from one multiple bin to next (see Preferences). In addition, you must define print positions for the Bin and the Quantity.

You would typically select this option if you use delivery note or order acknowledgement documents as picking slips. By printing all bins that contain quantities on hand of the stock item required, you could assist the warehouse staff in locating the item faster.

Use email address from document

Select this to email the sales order document to the email address defined against the order.

If you select this preference, then:

for all documents other than Dispatch notes and Dispatch invoices, the email address defined against the sales order is used if it is defined (Sales Order Entry - Order Header pane). If it is not defined, then the email address defined against the customer is used (AR Customer Maintenance).
for Dispatch notes and Dispatch invoices, the email address defined against the Dispatch note is used if defined (Sales Order Header Maintenance). If not defined, then the email address defined against the associated sales order is used (Sales Order Entry - Order Header pane). If that is also not defined, then the email address defined against the customer is used.

If you are saving invoices for reprinting, then the email address on the document at the time of invoicing is saved and used for future emailing from reprints.

This preference only applies if the Print method for the document is Word document or SRS document.

SRS template uses detail allocs XML

This applies to the printing of lot, bin and serial information where multiple bins or serials are attached to an associated lot.

If you select this option, then the lot, bin and serial information is only printed once against the line on the printed document. If you do not select this option, then the multiple bin information is repeated if more than one lot is allocated to a single line.

This option only applies to SRS Document printing.

If your document template was created before this option was selected and you want to only print serial information once, then you need to select this option and then recreate your template.

Rounding

Mass

These options enable you to define the number of decimals to which you want to round, and print, the mass values of an item in the Detail and Total sections of all Sales Order documents.

The rounded mass is calculated for each merchandise (stocked and non-stocked lines) line printed and the rounded results added together to obtain the total mass for the document. The total is not rounded again. The actual rounded results however do not need to be printed at line level in order to print the total mass.

Field	Description
Off	Select this to round up if the first non-significant digit is 5 or more and to round down if the first non-significant digit is 4 or less. For example, if the quantity is 1.12 and the unit mass is 1.12345, then the total line mass is 1.258264. If you select to Round Off and you enter a value of 2 in the No of decimals field, then the total line mass is printed as 1.26. If you enter a value of 3 in theNo of decimals field, then the total line mass is printed as 1.258. If you enter a value of 0 in theNo of decimals field, then the total line mass is printed as 1.
Up	Select this to add 1 to the least significant digit if there is any value in the digits to be dropped. For example, if the quantity is 1.12 and the unit mass is 1.12345, then the total line mass is 1.258264. If you select to Round Up and you enter a value of 2 in the No of decimals field, then the total line mass is printed as 1.26. If you enter a value of 3 in theNo of decimals field, then the total line mass is printed as 1.259. If you enter a value of 0 in theNo of decimals field, then the total line mass is printed as 2.
Down	Select this to truncate the value to the number of digits required. For example, if the quantity is 1.12 and the unit mass is 1.12345, then the total line mass is 1.258264. If you select to Round Down and you enter a value of 2 in theNo of decimals field, then the total mass is printed as 1.25. If you enter a value of 3 in theNo of decimals field, then the total line mass is printed as 1.258 If you enter a value of 0 in theNo of decimals field, then the total line mass is printed as 1.
No of decimals	Enter the number of decimals to which the mass values must be rounded.

Volume

These options enable you to define the number of decimals to which you want to round, and print, the volume values of an item in the Detail and Total sections of all Sales Order documents.

The rounded volume is calculated for each merchandise (stocked and non-stocked lines) line printed and the rounded results added together to obtain the total volume for the document. The total is not rounded again. The actual rounded results however do not need to be printed at line level in order to print the total volume.

Field	Description
Off	Select this to round up if the first non-significant digit is 5 or more and to round down if the first non-significant digit is 4 or less. For example, if the quantity is 1.12 and the unit volume is 1.12345, then the total line volume is 1.258264. If you select to Round Off and you enter a value of 2 in the No of decimals field, then the total line volume is printed as 1.26. If you enter a value of 3 in theNo of decimals field, then the total line volume is printed as 1.258. If you enter a value of 0 in theNo of decimals field, then the total line volume is printed as 1.
Up	Select this to add 1 to the least significant digit if there is any value in the digits to be dropped. For example, if the quantity is 1.12 and the unit volume is 1.12345, then the total line volume is 1.258264. If you select to Round Up and you enter a value of 2 in the No of decimals field, then the total line volume is printed as 1.26. If you enter a value of 3 in theNo of decimals field, then the total line volume is printed as 1.259. If you enter a value of 0 in theNo of decimals field, then the total line volume is printed as 2.
Down	Select this to truncate the value to the number of digits required. For example, if the quantity is 1.12 and the unit volume is 1.12345, then the total lime volume is 1.258264. If you select to Round Down and you enter a value of 2 in the No of decimals field, then the total line volume is printed as 1.25. If you enter a value of 3 in theNo of decimals field, then the total line volume is printed as 1.258 If you enter a value of 0 in theNo of decimals field, then the total line volume is printed as 1.
No of decimals	Enter the number of decimals to which the volume values must be rounded.

Counter sales

Print deposit details

Select this to print deposit details on Counter Sales invoice documents (see Deposit Detail Section).

Print payment detail lines

Select this to print payment details on Counter Sales invoice documents (see Payment Detail Section).

Dispatch invoices

Dispatch invoice format - for custom forms

Select this to be able to print custom form data with dispatch invoices.

This only applies to Invoice document types.


	When consolidating dispatch notes to produce a single invoice, the custom form data against each individual dispatch note cannot be printed on the invoice (i.e. custom form data can only be printed on a dispatch invoice if the invoice is being created for a single dispatch note).

Individual dispatch lines on cons invoice

Select this to print consolidated dispatch invoices line by line.

When you select this option:

a line is printed on the invoice for each dispatch note line that has been consolidated.
the invoice reflects exactly what was on each dispatch, and rounding differences in the extended values are eliminated.

If you do not select this option, then a line is printed for the total consolidation and a sub-line for each for each dispatch. See also: Consolidated Dispatch Note Number Section Messages.

This option is only enabled if the document type is 'Invoice' and you selected the setup option: Print individual dispatch note lines on invoice (Dispatch Notes Setup - Options tab).

Close

Select this to return to the Preferences screen.

Bitmap Forms

You use the Bitmap Forms function to specify bitmap images that you want to print on your sales order documents when they are faxed and/or printed.

This allows you to create your own pre-printed stationery for your documents.

Field

Description

Bitmap for faxing

Enter the name of the bitmap that you want to associate with the faxing of the stationery format.

The file must have a .BMP extension.


	Your entry at this field is used only if your Fax settings are configured to use a 3rd party fax application to fax your documents.

Bitmap for printing

Enter the name of the bitmap that you want to associate with the printing of the stationery format.

The file must have a .BMP extension.

Bitmap width

Indicate the width of the bitmap image that you want to print on the document and the measurement factor to use (i.e. inches or millimetres).

The bitmap is scaled automatically according to the specifications entered, retaining the aspect ratio (i.e. width to height).

Millimeters / Inches

Indicate whether the Bitmap width is in inches or millimeters

Close

Select this to return to the Preferences screen.

Notepad options

You use the Notepad function to specify the print position at which you want to print the contents of any Notepad text attached to a Sales Order.

Field	Description
Print notepad
Not printed	Select this if you do not want to print any Notepad text defined against a sales order.
Before first detail line	Select this to print Notepad text defined against a sales order before the first detail line on the document.
After last detail line	Select this to print Notepad text defined against a sales order after the last detail line on the document.
Print on separate page(s)	Select this to print Notepad text defined against a sales order on a separate page.
Column to start print	Indicate the horizontal (left to right) position on the document at which you want to begin printing the Notepad text.
Length of each note line	Indicate the number of characters to print on each line of Notepad text. This cannot exceed 60.
Close	Select this to return to the Preferences screen.

Heading Section

You use this function to define the row and column positions at which you want to print each of the heading fields on the order document.

The row refers to the vertical (top to bottom) position on the document, while the column refers to the horizontal (left to right) position on the document.

Fields

The following table lists the fields you can print in the Heading section of sales order documents:


	Not all fields are available for each document type. Fields that can be printed as barcodes are denoted with the words (with attribute). Refer to Barcode Printing.

Field

Origin/Comment

Company name

Company address lines 1-3

Company tax registration number

This prints your company's tax registration number (Company Maintenance - General tab)

Company EDI code

Customer

Customer (with attribute)

Customer name

Customer address lines 1-5

When you use the Delivery note document type to create a delivery note for a Supply Chain Transfer (SCT), then you can use the Customer address line 1 - 5 fields to print the source warehouse address on the document.

Customer postal/zip code

Customer state code

Contact

Telephone

Extension

Fax

This prints the fax number defined against the customer (AR Customer Maintenance) for a sales order document and the fax number from the warehouse (Warehouse Maintenance) for Supply Chain Transfers (SCTs).

Telex

Customer e-mail address

Customer purchase order

Customer tax registration number

This prints the tax registration number defined against the sales order. If this is not defined, then the company tax registration number defined against the customer is printed (AR Customer Maintenance - General Details).

If you are using master and sub-accounts, then if you are printing a document for a master account, the master account's tax registration number is printed. If you are printing a document for a sub-account, then the sub-account's tax registration number is printed irrespective of whether the invoices are attached to the master or sub-account. If the bill to address is to the sub-account, then the sub-account's tax registration number is printed.

Ship to customer name

Ship to address lines 1-5

When you use the Delivery note document type to create a delivery note for a Supply Chain Transfer (SCT), then you can use the Ship to address line 1 - 5 fields to print the address of the target warehouse on the document.

Ship to address postal/zip code

Dispatch to customer name

Dispatch to address lines 1-5

Dispatch to address postal/zip code

Address code

This prints the address code where multiple ship to addresses are used.

Customer EDI sender code

Sub-account master account number

This prints the master account number to which the sub-account for which you are printing the document belongs.

Sub-account store number

Page number

Salesperson

Salesperson name

Order date

Dispatch date

Ship date

Dispatch ship date (dispatch invoice)

Invoice / transfer date

System date

Time document printed

Ship via / instructions

Dispatch via / instructions

Special instructions

Special instruct. (with attribute)

Dispatch note

Invoice

Document number (with attribute)

Internal sales order

Internal s/order (with attribute)

Issue number

Delivery/invoice/transfer count

Order type

Order type description

Credit authorization

Branch

Branch name

Branch address lines 1-3

Geographic area

This prints the geographic area code defined against the sales order.

Geographic area name

This prints the name of the geographic area defined against the sales order.

Invoice terms

Tax exemption number

This field prints the tax exemption number defined against the Sales Order Header (Sales Order Header Maintenance).

Company registration number

This field prints your company's registration number (Company Maintenance - General tab).

Currency

Currency description

Invoice being credited/debited

Nationality

This prints the Nationality code defined against the Sales Order Header.

Delivery terms

This prints the Delivery Terms defined against the Sales Order Header (Sales Order Header Maintenance).

Delivery terms description

This prints the description for the Delivery Terms defined against the Sales Order Header (Sales Order Header Maintenance).

Shipping Location

This prints the Shipping Location defined against the Sales Order Header.

This field is only displayed if EC VAT is required (Tax Options).


	Only available with Word and SRS document printing.

Shipping Location Description

This prints the description for the Shipping Location defined against the Sales Order Header.

This field is only displayed if EC VAT is required (Tax Options).


	Only available with Word and SRS document printing.

Nature of transaction

This prints the Nature of Transaction code defined against the Sales Order Header (Sales Order Header Maintenance).

This field is only displayed if EC VAT is required (Tax Options)

Nature of transaction description

This prints the description for the Nature of Transaction code defined against the Sales Order Header (Sales Order Header Maintenance).

This field is only displayed if EC VAT is required (Tax Options)

Mode of transport

This prints the Mode of transport defined against the Sales Order Header (Sales Order Header Maintenance).

This field is only displayed if EC VAT is required (Tax Options)

Process

This prints the Process defined against the Sales Order Header (Sales Order Header Maintenance).

This field is only displayed if EC VAT is required (Tax Options)

Operator who added/changed order

This prints the code of the operator who added or last changed the sales order. For Dispatch Notes, it prints the code of the operator who added or last changed the Dispatch Note. If there is no operator code against the Dispatch Note, then the operator code against the Sales Order is printed.

Operator name

This prints the name of the operator who added or last changed the sales order. For Dispatch Notes, it prints the name of the operator who added or last changed the Dispatch Note.

Customer standard comment

Alternate key

Generated delivery note

Source warehouse for SCT

Source warehouse description

Target warehouse for SCT

Target warehouse description

Sales order status code

Document fax number

Document fax contact

Quotation number

The quotation number can be printed if the transaction for the document you are printing was created from a quotation.

Return merchandise number

The RMA number can be printed if the transaction for the document you are printing was created from a Return Merchandise Advice.

Salesperson 2

Salesperson name 2

Salesperson 3

Salesperson name 3

Salesperson 4

Salesperson name 4

Quick entry quote description

This prints the description entered against a quick entry quote (see Quick Entry).

Quick entry quote follow-up date

This prints the follow up date defined against a quick entry quote (see Quick Entry).

Document Custom Form Fields

You use this function to define the row and column positions at which you want to print each of up to 10 sales order custom form fields. These are the custom form fields attached to a sales order, a dispatch note, a reprint of an invoice and a reprint of a dispatch invoice.


	Sales order custom form fields are only carried through to a dispatch note if the option: Copy custom form from sales order is selected (Dispatch Note Review). However, custom fields specific to the dispatch note can also be added. The dispatch custom form is used as the basis for printing information on a dispatch invoice. If you want to print information from the sales order custom form on a dispatch invoice, then you need to set up the dispatch custom form with the same codes as the order form, and select the option Copy custom form from sales order is selected (Dispatch Note Review) to copy forms from the order to the dispatch. If you want different information on the dispatch invoice, then you need to set up the dispatch custom form separately (see Dispatch Note Maintenance - Tasks). Dispatch note Customer form fields are only printed on a reprint of a dispatch invoice if the option: Save custom form for reprinting with invoice is selected (Sales Order Setup - Printing tab). Document custom forms are not printed at all on a Consolidated Dispatch Invoice or on a reprint of a Consolidated Dispatch Invoice. The reason is that depending on the level of consolidation, several different dispatches could make up a single line on an invoice and each of these different dispatches could have different custom form information. There is therefore no single custom form to use. Sales order custom form fields are only printed on a reprint of an invoice if the option: Save custom form for reprinting with invoice is selected (Sales Order Setup - Printing tab).

The row refers to the vertical (top to bottom) position on the document, while the column refers to the horizontal (left to right) position on the document.

In a Word document, print positions for these fields are not required, but in the Standard document format they must be defined for the custom fields to print on the document.

Customer Custom Form Fields

You use this function to define the row and column positions at which you want to print each of up to 10 Customer custom form fields. These are the custom form fields attached to a customer.

The row refers to the vertical (top to bottom) position on the document, while the column refers to the horizontal (left to right) position on the document.

In a Word document, print positions for these fields are not required, but in the Standard document format they must be defined for the custom fields to print on the document.

Detail Section

You use this function to define the row and column positions at which you want to print each of the detail fields on the order document.

The row refers to the vertical (top to bottom) position on the document, while the column refers to the horizontal (left to right) position on the document.

Fields

The following table lists the fields you can print in the Detail Section of the document:


	Not all fields are available for each document type. If you want to print the component order lines defined against a single Bill of Materials on order documents, then you need to select the option: Print component on order documents against each component on the Bill of Materials (Structures and Routings). Fields that can be printed as barcodes are denoted with the words (with attribute). Refer to Barcode Printing.

Field

Origin/Comment

Detail line

Detail line (with attribute)

Detail line, full (with attribute)

This prints the full four character detail line number without suppressing any leading zeros.

Order quantity

Ship quantity

Reserved quantity

This prints the order quantity which is currently in reserve (i.e. the Reserved quantity (Sales Order Entry)).

Dispatch quantity

S/o backorder qty after dispatch

Backorder quantity

This prints the backorder quantity for the item.


	The back order quantity at the time of dispatch is only printed on consolidated dispatch invoices if you selected the Print option: Individual dispatch lines on cons invoice.

Order unit of measure

Stocking unit of measure

Other unit of measure

Stocking quantity to ship

Stock description

This prints the description of the stock code. For a stocked item, this is defined against the item (Stock Code Maintenance). For a non-stocked item, this is entered when the sales order line is entered.

If you are using Trade Promotions, and the item is a free good, then by default the word "Free:" is placed before the stock description. You can prefix the stock description with your own text using the Text for free goods field on the General tab of the Trade Promotion Setup program.

Stock code

This prints the code of the stock item.

Stock code (with attribute)

Stock code long description

Warehouse

Warehouse (with attribute)

Bin

Job (hierarchical or linked)

Price code

Unit price

Price unit of measure

This prints the unit of measure for the price.

Line discount percentage(s)

Sales tax (per line)

Gross amount

Line discount amount

Net amount after discount

Sales tax code

This indicates the tax code for the line. The descriptive tax is printed if defined (Descriptive Tax Codes).

Sales tax percentage

The tax percentage prints on the document even if the customer is exempt from tax because the sales tax code is retained on a stocked line. The calculated tax is, however, zero.

Net amount including tax

Unit factor

Line mass

Line ship date

This field is printed only for scheduled orders, forward orders, hierarchical orders and SCTs (Supply Chain Transfers).

Line mass (whole integer)

This field is calculated as the unit mass multiplied by the stocking quantity to ship.


	This field can only be printed for stocked items.

Line mass (remain. in integers)

The Line mass (remainder) is calculated as the decimal portion of this line mass (whole integer) calculation (e.g. a line mass of 7.56 prints 7 in the whole integer field and 56 in the remainder field).


	This field can only be printed for stocked items.

Stock unit volume

Line volume

For Order acknowledgements the Line volume field is calculated from the ordered quantity, unless you selected the Preference: Value order acknowledgment with ship qty. In all other cases it is calculated from the quantity to ship.

Gross profit percentage

This field is printed if the customer retail price was entered with a fixed price contract. The gross profit percentage is calculated using the retail price and the price paid (i.e. effectively it only applies if you have a fixed price contract).

In addition, a non-zero value must be held against the customer's gross profit and retail price fields.

Pricing quantity

The pricing quantity is based on the ship quantity. Therefore, if the ship quantity is zero, (i.e. the quantity is in backorder), the pricing quantity (if printed) is zero.

Net unit price

Unit price in order u/m

Tariff codes

Stock unit mass

Customer/supplier stock code

For stock items assigned a part category of K (i.e. Kit part) and a kit type K or S, the customer stock code cross-reference is printed only for the parent part, and not for the components of the kit.

The Customer/supplier stock code field is printed only if both the following conditions are met:

you have indicated that the customer requires the stock code interchange system (AR Customer Maintenance)
you have defined a valid link (i.e. cross-reference) between the customer's stock code and a SYSPRO stock code (Browse on Customer Stock Codes).

Customer unit retail price

Customer total retail price

Pricing contract number

Supplementary units

This prints the setting for this flag against the order line.

This field is only displayed if EC VAT is required (Tax Options)

User defined field 1 - 5

Line receipt date for SCT

Dispatch note

Dispatch note line

Order line user defined

Request ship date

Unit discount

Net unit price including tax

Order no - consolidated dispatch

This prints the sales order number from which the dispatch note was generated. This is applies to consolidated dispatch invoices only.

Product class

Warehouse to use

Pallet size

Line discount unit value only

Credit note reason code

Credit note reason description

Line mass - rounded

This prints the mass for stocked and non-stocked merchandise lines rounded to the nearest decimal according to the rounding preferences you defined. This is calculated as quantity multiplied by unit mass for the line. You do not need to print this field in order to print the Total mass rounded field for the document (see Total Section).

Line volume - rounded

This prints the volume for stocked and non-stocked merchandise lines rounded to the nearest decimal according to the rounding preferences you defined. This is calculated as quantity multiplied by unit volume for the line. You do not need to print this field in order to print the Total volume rounded field for the document (see Total Section).

Stock revision

This field refers to stock items that are under engineering change control (Stock Code Maintenance - Tracking).

This field prints the revision entered or assumed at the time the order was created or shipped. This depends on your whether you selected the setup option: Assume current rev/rel at time of adding order or Assume current rev/rel at time of shipping order (Bill of Materials Setup - Engineering Change Control tab).

Stock release level

This field refers to stock items that are under engineering change control Stock Code Maintenance - Tracking).

This field prints the release level entered or assumed at the time the order was created or shipped. This depends on your whether you selected the setup option: Assume current rev/rel at time of adding order or Assume current rev/rel at time of shipping order (Bill of Materials Setup - Engineering Change Control tab).

Country of origin

This prints the nationality code of the country of origin defined against the stock item (Stock Code Maintenance).

This field can only be printed for stocked items.

Country of origin name

This prints the description for the nationality code of the country of origin defined against the stock item (Stock Code Maintenance). This field can only be printed for stocked items.

Nationality codes are defined using the Nationalities program.

Inventory alternate key 1

Inventory alternate key 2

Merchandise line item count

Commission code

Manufacturer's part number

Drawing office number

Detail Custom Form Fields

You use this option to define the row and column positions at which you want to print each of up to 10 Sales Order detail line custom form fields. These are the custom form fields attached to either a sales order or a dispatch note detail line.

Detail line customer form information can be printed for stocked and non-stocked sales order lines. Refer to Dispatch Note Maintenance - Tasks for details on printing sales order custom form information on a dispatch invoice.


	Custom form fields attached to a Sales order detail line are only carried through to a dispatch note if the option: Copy custom form from sales order is selected (Dispatch Note Review). However, custom fields specific to the dispatch note can also be added. Dispatch note detail line custom form fields are only printed on a reprint of a dispatch invoice if the option: Save custom form for reprinting with invoice is selected (Sales Order Setup - Printing tab). Detail custom forms are not printed at all on a Consolidated Dispatch Invoice or on a reprint of a Consolidated Dispatch Invoice. The reason is that depending on the level of consolidation, several different dispatches could make up a single line on an invoice and each of these different dispatches could have different custom form information. There is therefore no single custom form to use. Custom form fields attached to a Sales order detail line are only printed on a reprint of an invoice if the option: Save custom form for reprinting with invoice is selected (Sales Order Setup - Printing tab).

The row refers to the vertical (top to bottom) position on the document, while the column refers to the horizontal (left to right) position on the document.

In a Word document, print positions for these fields are not required, but in the Standard document format they must be defined for the custom fields to print on the document.

Stock Code Custom Form Fields

You use this option to define the row and column positions at which you want to print each of up to 10 Stock code custom form fields. These are the custom form fields attached to a stock item.

Stock code custom form information can be printed for stocked order lines only.

The row refers to the vertical (top to bottom) position on the document, while the column refers to the horizontal (left to right) position on the document.

In a Word document, print positions for these fields are not required, but in the Standard document format they must be defined for the custom fields to print on the document.

Comment Section

You use this function to define the column position at which you want to print each of the free format comment line fields on the order document.

The column refers to the horizontal (left to right) position on the document.

Field

Description

Print first comment on

Both these options can be selected.

Stock line

Select this to print the first free format comment line attached to a stocked line.

Non-stocked line

Select this to print the first free format comment line attached to a non-stocked line.


	The attached comment must be on the first line after the associated merchandise line.

Close

Select this to close the current window and return to the previous window.

You save the changes you made to the format at the time of exiting the program.

Fields

The following table lists the fields you can print in the Comment section of sales order documents:

Field	Origin/Comment
Comment line	Enter the position at which you want to print the comment line number on the document.
Comment description	Enter the position at which you want to print the comment description on the document.

Miscellaneous/Freight Charge Section

You use this function to define the column position at which you want to print each of the miscellaneous and freight charge fields on the order document.

The column refers to the horizontal (left to right) position on the document.

Fields

The following table lists the fields that you can print in the Miscellaneous and Freight Charges section of sales order documents:

Field	Origin/Comment
Misc/frt charges line	This prints the miscellaneous or freight charge line number as defined against the sales order.
Misc/frt charges description	This prints the miscellaneous or freight charge description. For a freight line using the _FRT product class, the standard description FREIGHT CHARGES is printed.
Misc/frt charges amount	This prints the miscellaneous or freight charge amount as defined against the sales order.
Misc / frt charges tax amount	This prints the miscellaneous or freight charge tax amount as defined against the sales order.
Misc / freight net amt (inc tax)
Misc / freight sales tax code
Misc / freight product class
Service charge quantity	This prints the quantity of the returnable item you are billing for a returnable item service charge. This quantity is adjusted by the value defined in the Quantity factor field (Service Charge Maintenance).
Service charge unit price	This prints the unit price assigned to the charge line (Service Charge Lines).
Service charge stock code	This prints the stock code for a miscellaneous service charge line.

Deposit Detail Section

You use this section to define the column position at which you want to print each of the Counter sale deposit detail fields on the order document.

If you selected the setup option: Show deposits on sales order as comments (Sales Order Setup), then counter sales deposits can be printed as comments against the order/invoice. When more than one deposit is taken against a counter sale, an additional comment line indicates the current total deposit amount on the Sales Order.

If you did not select the option: Show deposits on sales order as comments (Sales Order Setup), then counter sales deposits can be printed on sales order documents as deposit lines.


	When you process a deposit against a sales order, a zero balance invoice is generated to which the deposit is linked. This invoice has no detail lines. Only once you allocate the deposit are detail lines created against the invoice and only then will the counter sale detail lines for the deposit appear on the document.

Fields

The following table lists the fields you can print in the Deposit Details Section of the document:


	Not all fields are available for each document type.

Field	Origin/Comment
Deposit date	This prints the date on which the deposit was processed (see Counter Sales).
Deposit invoice number	This prints the invoice number against which the deposit was processed.
Deposit amount	This prints the amount of the deposit.
Deposit comment	This prints the comment assigned to the deposit (see Counter Sales).
Deposit payment type	This prints the payment type against which the deposit was processed (see Counter Sales).
Deposit payment description	This prints the description for the payment type code.
Deposit detailed comments	This prints any detailed comments defined against the deposit (see Counter Sales).

Payment Detail Section

You use this section to define the column position at which you want to print each of the payment detail fields on the order document.

The column refers to the horizontal (left to right) position on the document.

Fields

The following table lists the fields you can print in the Payment Details Section of the document:


	Not all fields are available for each document type.

Field	Origin/Comment
Payment type
Payment description
Payment amount
Payment deposit invoice number
Payment comment

Summary Service Charges Section

You use this section to define the column position at which you want to print each of the summarized service charge fields on the order document. These fields are printed if you selected the option: Summarize charge lines on invoice for a service charge (Service Charges).

The column refers to the horizontal (left to right) position on the document.

Fields

The following table lists the fields that you can print in the Summary Service Charges section of sales order documents:

Field	Origin/Comment
Product class
Product class description
Quantity
Value
Unit price
Value including tax
Tax

Single Level Component Section

You use this function to define the indentation and column position at which you want to print each component stock item and description on the order document.

Field	Description
Indentation
Component stock code
Component stock description
Comprising message
Column	Indicate the horizontal position (i.e. Left to right) at which you want to print the text entered in the Message field. The column specification for any field cannot exceed 120.
Message	Indicate the actual text that must be printed on the document.
Print lots/ bins/serials when component not printed	Select this to print the lots, bins and serials for associated kit components on the order document when the kit component itself is not printed. The kit component is not printed. This applies if the option: Print component on order documents is not selected (Structures and Routings).
Close	Select this to close the current window and return to the previous window. You save the changes you made to the format at the time of exiting the program.

Multiple Bin Section

If the option: Multiple bins in use is selected against the warehouse (Browse on Warehouses), then you use this function to define the column position at which you want to print the first bin and bin quantity fields on the order document.

The column refers to the horizontal (left to right) position on the document.

Fields

The following table lists the fields you can print in the Multiple Bin Section of sales order documents:

Field	Origin/Comment
First position of bin
First position of bin quantity

Lot Traceability Section

You use this function to define the column position at which you want to print each of the lot traceable fields on the order document.

The column refers to the horizontal (left to right) position on the document.

Fields

The following table lists the fields you can print in the Lot Traceability Section of sales order documents:

Field	Origin/Comment
Lot
Revision
Revision level
Certificate
Lot quantity
Lot expiry date

Serial Number Tracking Section

You use this function to define the column position at which you want to print each of the serial number tracking fields on the order document.

The column refers to the horizontal (left to right) position on the document.

Fields

The following table lists the fields you can print in the Serial Number Tracking Section of sales order documents:

Field	Origin/Comment
First position of serial number
First position of batch quantity
First position of serial desc
First pos. of serial expiry date
First pos. of serial location

Consolidated Dispatch Note Number Section Messages

This is only relevant when:

a consolidated dispatch invoice is being printed and
you have not selected the preference: Individual dispatch lines on cons invoice ( Print Options), so there is only ever one dispatch note per line.

The consolidated line is printed using the information in the consolidated dispatch note number section. The message is used in conjunction with that information. The line is printed after a merchandise line and before any lots / bins /serials that are associated with that merchandise line.

Fields

The following table lists the fields you can print for Consolidated Dispatch Notes:

Field	Origin/Comment
Position of dispatch note number	This defines where the consolidated dispatch note number must print.
Position of dispatch quantity	This defines where the consolidated dispatch note quantity must print.
Position of dispatch date	This defines where the consolidated dispatch note date must print.
Position of sales order number	This defines where the sales order number for the consolidated dispatch note must print.
Position of customer p/o number	This defines where the customer's purchase order number for the consolidated dispatch note must print

Total Section

You use this function to define the row and column positions at which you want to print each of the total fields on the order document.

The row refers to the vertical (top to bottom) position on the document, while the column refers to the horizontal (left to right) position on the document.

Fields

The following table lists the fields you can print in the Total Section of the document:


	Not all fields are available for each document type.

Field	Origin/Comment
Sales tax code	When using USA tax (Tax Options), the Amount on which tax is payable, the Sales tax code, Sales tax percentage and Sales tax amount fields are printed only once as part of the totals. When using normal tax, the whole group is repeated once for each tax code that has been used in the invoice.
Amount on which tax is payable	This field is only available for Standard documents. For MSWord or SRS format documents, this field is located in the separate Sales Tax detail section. When using USA tax, the equivalent entry in the word format is the Amount on which tax is payable US. When using USA tax (Tax Options), the Amount on which tax is payable, the Sales tax code, Sales tax percentage and Sales tax amount fields are printed only once as part of the totals. When using normal tax, the whole group is repeated once for each tax code that has been used in the invoice.
Sales tax percentage	When using USA tax (Tax Options), the Amount on which tax is payable, the Sales tax code, Sales tax percentage and Sales tax amount fields are printed only once as part of the totals. When using normal tax, the whole group is repeated once for each tax code that has been used in the invoice. The sales tax code is retained on a stocked line, so the tax percentage will print on the document even if the customer is exempt from tax. The calculated tax is, however, zero.
Sales tax amount	When using USA tax (Tax Options), the Amount on which tax is payable, the Sales tax code, Sales tax percentage and Sales tax amount fields are printed only once as part of the totals. When using normal tax, the whole group is repeated once for each tax code that has been used in the invoice.
Sales tax amount in home currency	This indicates the amount, in the home currency, on which the tax is payable. This applies if you selected the option: UK VAT applicable (AR Customer Maintenance). The value is printed in the currency defined in the VAT currency field (AR Customer Maintenance). This is typically Pounds sterling.
Hash quantity total
Total mass	This prints the total mass for the lines on the document.
Total gross amount
Total net amount
Total line discount amount	This prints the total discount allocated to the merchandise line. It includes chain discount, unit discount and value discount.
Total invoice discount amount	This prints the total overall order discount allocated to merchandise. Only the discount for the invoiced value is printed.
Total invoice discount percent	This prints the percentages applicable to the whole sales order in the format 1% / 2% / 3%.
Total net amount including tax	This prints the Invoice amount less Miscellaneous and Freight with Tax included.
Total sales tax	This prints the total amount of Tax.
Total invoice amount	This prints the Merchandise + Freight + Miscellaneous amounts less Discount plus Tax.
Total freight amount	This prints the total freight amount excluding tax.
Total misc. charges amount	This prints the total miscellaneous charges amount excluding tax.
Total cash discount offered	This prints the total Cash Discount.
Total invoice less cash discount	This prints the total Invoice less Cash Discount.
Cash discount expiry date	This prints the cash discount expiry date. This expiry date is calculated from the discount days defined against the terms code. For delivery notes and order acknowledgements, this field is displayed as * reserved *.
Invoice/credit/debit note/transfer	What is printed varies depending on the type of document being printed as follows: SCT - Goods in transit reference Dispatch note - Dispatch number Credit note - Credit invoice number All other documents - Invoice number if present
Total invoice amount (exc. tax)	This prints the Merchandise + Freight + Miscellaneous amounts less Discount.
Total volume	This prints the total amount of Volume.
Total customer retail price	This prints the total of the customer retail prices at line level. This field is printed if the Customer retail price has been defined in the Browse on Customer Stock Code Cross-Ref.
Invoice due date	This prints the invoice due date on the document. This is calculated from the invoice terms defined against the customer (AR Customer Maintenance).For delivery notes and order acknowledgements, this field is displayed as * reserved *.
Sales tax amount - local currency	This applies to foreign currency customers only and prints the Total tax in local currency.
Exchange rate	This applies to foreign currency customers only and prints the Exchange rate used for the transaction.
Total invoice amt ex tax - local	This applies to foreign currency customers only and prints the Merchandise + Freight + Miscellaneous amounts less Discount.
Total invoice amount - local cur	This applies to foreign customers only and prints the Merchandise + freight + Miscellaneous less Discount plus Tax in the local currency.
Total freight amount incl tax	This prints the total amount of Freight including tax
Total freight tax	This prints the total amount for Freight tax.
Total misc. charges amt incl tax	This prints the total amount for Miscellaneous charges including tax.
Total misc. charges tax	This prints the total amount for Miscellaneous charge tax.
Total quantity ordered (ord uom)	This prints the total quantity shipped in the Alternate unit of measure, if defined against the stock item (Stock Code Maintenance).
Total quantity shipped (stk uom)	This prints the total ship quantity in the Stocking unit of measure.
Total tax before rounding	This prints the tax value before rounding is applied (see Tax Options - Options tab).
Total invoice before rounding	This prints the invoice value before rounding is applied (see Tax Options - Options tab).
Tax rounding value	This prints the tax value after rounding was applied (see Tax Options - Options tab).
Invoice rounding value	This prints the invoice value after rounding was applied (see Tax Options - Options tab).
Total rounding value	This prints the total invoice plus tax value after rounding was applied (see Tax Options - Options tab).
Total payments applied	This prints the total payments processed and deposits applied to a counter sales invoice (see Counter Sales).
Total invoice less payments	This prints the outstanding counter sales invoice value after payments processed against it and deposits applied to it.
Total tax in home currency	This prints the total tax value in the home currency. This applies if you selected the option: UK VAT applicable (AR Customer Maintenance). The value is printed in the currency defined in the VAT currency field (AR Customer Maintenance). This is typically Pounds sterling.
Total merch tax in home currency	This prints the total tax value for merchandise items in the home currency. This applies if you selected the option: UK VAT applicable (AR Customer Maintenance). The value is printed in the currency defined in the VAT currency field (AR Customer Maintenance). This is typically Pounds sterling.
Ship to customer name	This prints the name of the customer to whom the order must be shipped.
Ship to address line 1 - 5	This prints the address of the customer to whom the order must be shipped.
Total mass rounded	This prints the total rounded mass for stocked and non-stocked merchandise lines for the document according to the Rounding preferences you defined. The rounded mass is calculated for each merchandise (stocked and non-stocked lines) line printed and the rounded results added together to obtain the total mass rounded for the document. The total is not rounded again. The actual rounded results however do not need to be printed at line level in order to print the total rounded mass.
Total volume rounded	This prints the total rounded volume for stocked and non-stocked merchandise lines for the document according to the Rounding preferences you defined. The rounded volume is calculated for each merchandise (stocked and non-stocked lines) line printed and the rounded results added together to obtain the total volume rounded for the document. The total is not rounded again. The actual rounded results however do not need to be printed at line level in order to print the total rounded volume.
Hash quantity total - units only	This field only applies to stock items that are set to Unit quantity processing (Stock Code Maintenance). This field prints the quantity in the stocking unit of measure. This field accumulates the units portions of the ship quantities for stock items requiring unit quantity processing. Ship quantities for stock items not requiring unit quantity processing are not included. If you are printing an order acknowledgement document, the order quantities are used unless you selected the Preference: Value order acknowledgment with ship qty.
Hash quantity total - pieces only	This field only applies to stock items that are set to Unit quantity processing (Stock Code Maintenance). This field accumulates the pieces portions of the ship quantities for stock items requiring unit quantity processing. Ship quantities for stock items not requiring unit quantity processing are not included. If you are printing an order acknowledgement document, the order quantities are used unless you selected the Preference: Value order acknowledgment with ship qty. The pieces are not rounded up to units.
Comment text line 1 - 4	You use these fields to print the comments entered against a sales order using the Order Comments function on the End Order screen (see End Order).

MS Word Options

As an alternative to printing your documents on pre-printed stationery, you can configure SYSPRO to allow you to print your stationery documents using Microsoft Word.

Refer to Word Printing for additional information about printing using MS Word.

Design Template

You use the Design Template function to open the applicable Word template and insert the fields that you want to print on your stationery.

Refer to Design Template for additional information.